Labashop

The KuKirin G2/G4 tail light is an important part of your scooter’s lighting system. Located at the rear, it helps other road users see you more clearly, especially at night or in low-light conditions.

Over time, an impact, damaged wiring or an electrical issue can cause the KuKirin G2/G4 tail light to stop working correctly. Replacing a faulty unit allows you to restore the original rear lighting of your scooter.

What is the role of the KuKirin G2/G4 tail light?

The main purpose of the KuKirin G2/G4 tail light is to improve your visibility to other road users.

It is particularly useful when riding at night, at dusk or in poor weather conditions where visibility may be reduced.

A properly functioning tail light therefore contributes to safer riding by making the rear of your scooter easier to see.

One tail light compatible with the KuKirin G2 and G4

The same KuKirin G2/G4 tail light is compatible with two models:

• KuKirin G2
• KuKirin G4

It can be used as a direct replacement when the original rear light is damaged or no longer works correctly.

What are the signs of a faulty KuKirin G2/G4 tail light?

A problem with the KuKirin G2/G4 tail light is usually easy to identify.

Several signs may indicate that the light needs to be replaced:

• the tail light no longer turns on;
• the light works intermittently;
• the brightness is unusually low;
• the housing is cracked or broken;
• the light has been damaged after a fall or impact;
• the wiring or connector is damaged.

Before replacing the light, it is worth checking the electrical connection to confirm that the problem actually comes from the tail light itself.

Why can the KuKirin G2/G4 tail light become damaged?

The KuKirin G2/G4 tail light is exposed to vibrations and shocks whenever the scooter is being used.

Repeated vibrations, road debris and accidental impacts can gradually damage the light, its housing or its mounting points.

Electrical issues or damaged wiring can also prevent the tail light from operating normally.

When should you replace the KuKirin G2/G4 tail light?

The KuKirin G2/G4 tail light should be replaced when it can no longer provide reliable rear lighting.

Replacement may be necessary if the light is broken, no longer illuminates or has suffered enough damage that it cannot be securely mounted.

If the light regularly cuts out or shows other signs of malfunction, replacing it before it completely fails can also be a good option.

How to replace the KuKirin G2/G4 tail light

Replacing the KuKirin G2/G4 tail light requires removing the faulty light and accessing its electrical connection.

The original light can then be disconnected and the replacement unit installed in the same position.

Once everything has been reassembled, test the tail light to make sure it operates correctly before riding again.

Video tutorial: how to replace the KuKirin G2/G4 tail light

To help you with the replacement, you can follow our video tutorial showing how to change the KuKirin G2/G4 tail light.

The tutorial shows the main steps required to remove the original light and install the replacement. The video was recorded on a KuKirin G4.

Where to buy a KuKirin G2/G4 tail light?

If your original light is broken or faulty, you can find the KuKirin G2/G4 tail light below.

• 
• 

KuKirin G2/G4 Tail light

25.00€

KuKirin G2/G4 Tail light

In stock

KuKirin G2/G4 Tail light quantity −+

The replacement part is compatible with both the KuKirin G2 and KuKirin G4 and allows you to restore the scooter’s rear lighting.

Delivery: 7 to 10 days.

Check your rear lighting regularly

It is a good idea to check the KuKirin G2/G4 tail light regularly, especially before riding at night.

Check that the light turns on correctly and inspect the housing, mounting points and visible wiring for signs of damage.

After a fall or impact involving the rear of the scooter, check the tail light before continuing to ride.

Replacing a faulty KuKirin G2/G4 tail light

The KuKirin G2/G4 tail light plays an important role in making your scooter visible to other road users.

If the light is broken or no longer works correctly, replacing it allows you to restore the original rear lighting. Since the same replacement part is compatible with both the KuKirin G2 and KuKirin G4, it provides a straightforward solution for repairing either model.